In this thesis , it investigates a simulation algorithm of multiple forming process by adopting the minimum plastic work path , that is the ideal forming path , and putting to use the ideal forming theory when the product is specified 本文采用最小功路線,即理想成形路線,應用理想成形理論,在產品構形給定的條件下,研究了多步反向模擬算法。
3 ) the chosen single case turbine is suitable to satisfy the compress rate demand in the project , and if the thimble reheat take the bushing heater as the model , the simple parameter change of the bush and working path can make it reach the demand 3 )經過選型的單級壓氣機可以滿足設計方案中對壓比的要求,其穩態參數也符合設計值;同時,若采用與吸熱器類似的套管式回熱器,則只需要根據實際情況修正套管及工質流道的幾何參數就可以達到設計要求。